Renderoc HB25 FC387080-20KG
Renderoc HB25
Renderoc HB25 is a high build, shrinkage compensated concrete repair mortar for patching up to 1m2 sections in concrete up to 30 MPa. It can be applied to vertical concrete patches up to 80mm deep. Suitable for use with Galvashield anode protection systems.
Typical Applications
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area, trowel build depth between 10-40mm required, and required strength
Advantages
- Maximum compatibility with concrete with a compressive strength in the range 15 - 30 MPa
- Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
- Exceptional system of shrinkage compensation provides long-term dimensional stability
- Lightweight formulation enables extra high-build - fewer cold joints
- Frequently obviates the need for formwork
- Can be applied quickly and efficiently by wet spraying
- One component, pre-bagged to overcome site-batched variations
- Contains no chloride admixtures
- Suitable for internal and external applications
- 28 day Strength : 23MPa
- Application : Trowel, Wet Spray
- Compatible concrete strength : 15 to 30MPa
- Suitable for use with Galvashield anodes? : Yes
- Trowel Build / Depth : 10mm to 80mm vertical
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
