Patchroc C FC342060-20KG

Patchroc C FC342060-20KG
  • Patchroc C FC342060-20KG

Patchroc C

Patchroc C is a fast setting patch repair mortar for the emergency reinstatement of localised patches between 25mm and 200mm deep in concrete pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors.

Typical Applications

  • Floor, pavement or joint concrete repairs
  • Localised patch repair
  • Trowel application
  • Requiring trafficability in 4 hours, where section depth is between 25-200mm and up to 50 litres in volume

Advantages

  • Rapid strength gain - will accept traffic in 2 - 4 hours High strength, abrasion and weather resistance
  • Single component product eliminates site batching and requires only the site addition of clean water
  • Excellent bond to the concrete substrate
  • Shrinkage compensated
  • Suitable for patches up to 200 mm deep
  • 28 day Strength : 50-60MPa (depending on consistency of mix)
  • Abrasion resistance : High
  • Application : Trowel
  • Chemical resistance : Medium
  • Full cure @ 20°C : 7 days
  • Light traffic : 2-4 hours
  • Service temperature range : 10°C-60°C
  • Suitable for use with Galvashield anodes? : No
  • Trowel Build / Depth : 25-200mm deep
  • Vehicle traffic @ 20°C : 2-4 hours

Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

enter the yield value as shown on the TDS
 

Overview

Typical Applications

  • Floor, pavement or joint concrete repairs
  • Localised patch repair
  • Trowel application
  • Requiring trafficability in 4 hours, where section depth is between 25-200mm and up to 50 litres in volume

Advantages

  • Rapid strength gain - will accept traffic in 2 - 4 hours High strength, abrasion and weather resistance
  • Single component product eliminates site batching and requires only the site addition of clean water
  • Excellent bond to the concrete substrate
  • Shrinkage compensated
  • Suitable for patches up to 200 mm deep

Key Properties

  • 28 day Strength : 50-60MPa (depending on consistency of mix)
  • Abrasion resistance : High
  • Application : Trowel
  • Chemical resistance : Medium
  • Full cure @ 20°C : 7 days
  • Light traffic : 2-4 hours
  • Service temperature range : 10°C-60°C
  • Suitable for use with Galvashield anodes? : No
  • Trowel Build / Depth : 25-200mm deep
  • Vehicle traffic @ 20°C : 2-4 hours

Spec Clause

Brochures

Product Calculator

Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

enter the yield value as shown on the TDS
 

Technical Data Sheet

Patchroc C TDS

Safety Data Sheet

Patchroc C SDS