Nitoseal SC800

Nitoseal SC800
  • Nitoseal SC800

Nitoseal SC800

Nitoseal SC800 is a low modulus, hight joint movement accommodation, one component silicone rubber joint sealant, with Roadseal® technology.


Typical Applications

  • Sealing high movement joints in concrete roads and pavements

Advantages

  • Ready to use
  • Easy contractor application
  • No mixing required
  • Fast rate of cure
  • Excellent adhesion to clean dry concrete
  • Excellent weathering - UV and ozone resistant
  • Dispensed from a bulk container by hand or air powered pump
  • Large joint movement accommodation
  • Application Type (Gun/Pour) : Gun
  • Chemical Resistance to spillage : Resistant to dilute acids and alkalis. Not resistant to organic solvents
  • Cure rate : 2:1 and an overriding minimum sealant depth of 7 mm
  • Full cure : 17 +/- 5
  • Joint Movement Capability : Plus 100% - minus 50%
  • Number of Components : One
  • Service temperature : Minus 50°C - 150°C
  • Standards compliance / conforms to : NSW RMS Bridge Decks QA Spec B312
  • Tack Free Time : 45 - 60 minutes @ 23°C
  • Tooling Time : 20 minutes @ 23°C

Enter dimensions of your application to calculate the volume and pack quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

Overview

Typical Applications

  • Sealing high movement joints in concrete roads and pavements

Advantages

  • Ready to use
  • Easy contractor application
  • No mixing required
  • Fast rate of cure
  • Excellent adhesion to clean dry concrete
  • Excellent weathering - UV and ozone resistant
  • Dispensed from a bulk container by hand or air powered pump
  • Large joint movement accommodation

Key Properties

  • Application Type (Gun/Pour) : Gun
  • Chemical Resistance to spillage : Resistant to dilute acids and alkalis. Not resistant to organic solvents
  • Cure rate : 2:1 and an overriding minimum sealant depth of 7 mm
  • Full cure : 17 +/- 5
  • Joint Movement Capability : Plus 100% - minus 50%
  • Number of Components : One
  • Service temperature : Minus 50°C - 150°C
  • Standards compliance / conforms to : NSW RMS Bridge Decks QA Spec B312
  • Tack Free Time : 45 - 60 minutes @ 23°C
  • Tooling Time : 20 minutes @ 23°C

Test Certificates

Spec Clause

Detail Drawing

Brochures

Product Calculator

Enter dimensions of your application to calculate the volume and pack quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

Technical Data Sheet

Nitoseal SC800 TDS

Safety Data Sheet

Nitoseal SC800 SDS