Nitoseal SC600
Nitoseal SC600
- Overview
- Key Properties
- Test Certificates
- Spec Clause
- Case Studies
- Detail Drawing
- Brochures
- Product Calculator
Typical Applications
- Sealing joints in chemically acidic and alkali environments as well as biological environments such as water and wastewater
Advantages
- One component sealant - ready to use
- Fast rate of cure - reduced back to service times
- UV resistant - long life weathering resistance
- Highly resistant to biological attack such as sewers
- Highly resistant to a wide range of chemicals including strong acids and alkalis
- Highly resistant to pool chlorine, salt water chlorination and ozone treatment
- Complies to AS/NZS 4020:2018 Products in Contact with Potable Water
- Application Type (Gun/Pour) : Gun
- Chemical Resistance to spillage : Highly resistant to biological attack such as sewers, highly resistant to a wide range of chemicals including, strong acids and alkalis, highly resistant to pool chlorine, salt water chlorination and ozone treatment
- Cure Time (Approximately) : 3mm in 24 hours, 1mm / day @ 25°C / 65% RH
- Form : 8mm to 50 mm wide
- Hardness Shore 'A' : 32 +/- 5
- Number of Components : One
- Service temperature : Minus 50°C - 150°C
- Standards compliance / conforms to : Complies to AS/NZS 4020:2018 products in contact with Potable Water
- Tooling Time : 20 minutes @ 25°C 65% RH
- Tooling time : +/- F5625% butt joints (total 50%)
Enter dimensions of your application to calculate the volume and pack quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.