Expoband F2001 200MM x 1MM 20M Roll

Expoband F2001 200MM x 1MM 20M Roll
  • Expoband F2001 200MM x 1MM 20M Roll

Expoband F

Expoband F Tape is a Flexible Polyolefin membrane available in 1mm and 2mm thicknesses and widths including 100mm, 150mm, 200mm, 250mm and 300mm. Special widths up to 500mm can be manufactured to order (please contact us for further information if this is of interest). Expoband F Tape is supplied in rolls 20m in length.
Expoband F Tape is bonded to the structure on both sides of the joint using Nitomortar AP a moisture tolerant, non sag, two part epoxy adhesive specifically formulated to give optimum adhesion to the Expoband F and construction materials.


Typical Applications

  • Used to seal joints in car park decks, podiums, balconies, walkways and other elevated structures, where the Expoband F can be protected from mechanical damage by a cover plate as well as water immersed applications such as tanks, sewers, reservoirs, pipelines and swimming pools.

Advantages

  • Forms a tough, flexible joint flashing
  • Accommodates continuous, and pronounced cyclic movement
  • Excellent resistance to UV and weathering
  • Complies with AS4020:2018 - suitable for potable water
  • Application to dry and damp (SSD) surfaces
  • Excellent adhesion to most construction materials
  • Performance not affected by climatic extremes
  • Rot resistant
  • Expoband F can be heat welded for the continuity of long joint lengths
  • Perforations along the edges of the Expoband F provide a mechanical fixing element in addition to the excellent chemical bond offered by the Nitomortar AP

Overview

Typical Applications

  • Used to seal joints in car park decks, podiums, balconies, walkways and other elevated structures, where the Expoband F can be protected from mechanical damage by a cover plate as well as water immersed applications such as tanks, sewers, reservoirs, pipelines and swimming pools.

Advantages

  • Forms a tough, flexible joint flashing
  • Accommodates continuous, and pronounced cyclic movement
  • Excellent resistance to UV and weathering
  • Complies with AS4020:2018 - suitable for potable water
  • Application to dry and damp (SSD) surfaces
  • Excellent adhesion to most construction materials
  • Performance not affected by climatic extremes
  • Rot resistant
  • Expoband F can be heat welded for the continuity of long joint lengths
  • Perforations along the edges of the Expoband F provide a mechanical fixing element in addition to the excellent chemical bond offered by the Nitomortar AP

Test Certificates

Spec Clause

Technical Data Sheet

Expoband F TDS

Safety Data Sheet

Expoband F SDS